How To Keep Your Mobile Younger

How To Keep Your Mobile Younger - When having a cell phone, of course, required a treatment to remain durable and appropriate. That way we have phones that can last a long time.

This time, I will try to share about How To Keep Your Mobile Youth. See further below.

PHONE BATTERY
5 Damage Occurs Frequently Battery:

1. Ballooned due to short-circuit the battery or shorting suddenly being dropped or submerged in water. As a result, the battery is quickly drained the battery so that the tube gets hot and bubbling.
2. Batteries often drop. There are several causes of this is the case, such as the quality of the battery is not good, because of the age factor impairment mAh battery (DC current pressure), and short-circuit.
3. Because of damage to the battery hot plate temperature control inside the battery. On a flat battery there is a component that controls the size of the current voltage in or out. This resulted in damage to the supply current is not normal and makes the battery hot.
4. No battery at all because the current short-circuit (shorting) in mobile machines which impact on the battery. Batteries typically do not have the automatic fuse that could break the current issued. Other causes because the battery has not been used or in-charge.
5. The battery can not charge. Could be caused by connecting the phone to a cell phone or the battery is not connected even less well. Other cause in the charger. If the problem is in the battery, then it needs to be replaced. Damage to the cells in the battery tube that has been frozen and can not accept and accommodate incoming flows.

5 Ways to Take Care of Batteries:

1. Do not often nge-charge in mobile living conditions. In-charge when the phone is turned off, when the battery is full, the charging will be terminated by the charger IC controls the charging of the battery charge. But when the conditions of life, is not effective and can make faulty IC charge and make a battery charger be damaged by voltage los (without inhibitors and breakers again).
2. Do not call the phone state in-charge. Because it would drain the battery power. Moreover, until the phone gets hot because it is too long to call. Incoming voltage of the charger will automatically be issued in large numbers so that would make the battery tube gets hot and bubbling.
3. Because when the phone is turned on requires 0.4 ampere flows, then when the phone is searching for a signal requires 0.4 ampere flows, then the lights came on the phone requires a voltage 0.3 amperes. So if too often revive-off phone by removing the battery will quickly drop the battery risks.
4. Avoid charging with charger costume. Quality standards are not made to be easily damaged batteries. Due to excessive current into the battery without charger IC controlled. Usually charger imitation issued an unstable flow.
5. Immediately charge the battery, do not wait for the low-bat or die. It may cause the cells in the battery becomes weak tubes and vacuum. So eventually drop, even broken. Because the DC value dropped from 3.6 volts to 2 or 1 volt. If it is below 3.0 volt battery can not charge flow again.

LCD
5 Damage to the LCD (display) That Often Occur:

1. Blank or no form display. Because there is a broken line, liquid-resolution LCD is damaged, or it could be due to lack of machines connected to the phone. Usually caused by the fall so that the connector moved or disconnected paths on a flexible cable in clamshell phones.
2. LCD broken due to the crunch, falling or depressed. For the broken LCD is certain to be replaced. The more advanced or rare LCD screen, the more expensive the price.
3. There are lines on the screen. This damage is not so fatal if the line is there is only one. But if there are more than 5 lines and its position in the middle would be quite disturbing.
4. Opaque, mostly caused by the LCD age. Or because the LCD is not good quality.
5. Blotches or stains on the LCD. Often caused by fluid that has begun to rupture in groups. This problem is caused by aging LCD or LCD is never depressed or comes to the crunch.

5 Tips For Sustainable LCD:

1. Avoid direct sunlight for a long time (3 to 4 hours) because it will make the sharpness of LCD pixels fade and become opaque.
2. Avoid exposure to water, moisture or the like. Because the LCD is very vulnerable to water that could make the LCD completely destroyed.
3. Avoid hard impact because it will make the LCD breaks and cracks.
4. Avoid storing the phone in a tight jeans pocket because the LCD can be depressed and broke.
5. Avoid children and a place that allows these phones can fall.

KEYPAD
5 Causes Damage Occurs Frequently Keypad:

1. Because dirty or corrosion caused by excess water or moisture that has formed rust and blocking key press. The key characteristics can still function but must be strongly suppressed.
2. Because the replacement of non-original casing or casing due to the size of the keypad buttons do not match.
3. There is a line that cut keypad. Usually the keys are not functioning not only one button, 4 buttons can happen and everything can not be suppressed.
4. Keypad connector (that connects the engine to the phones keypad) gross, or tenuous. This problem often occurs on the keypad of his phone apart from the engine.
5. CPU and keypad driver IC fractured his leg in the path of the keypad buttons. Caused by concussion or crust on the IC.

5 Ways to Handle Damage Keypad:

1. When the keypad is pressed hard but still able to function, the solution simply open the phone casing and clean the keypad buttons are troubled with a pencil eraser.
2. If the damage is due to the replacement of the casing should we find a KW1 or original casing. It's a little pricey but it does not cause problems.
3. If the keypad does not work because there are broken lines, the solution is to do the jumper on the track and a guide to the reading proficiency level track scheme. If you do not understand, ask for help from the technicians who are professionals.
4. If the damage is only because we simply tighten loose screws with a screwdriver phones.
5. For issues and broken drivers CPU, this phone should be handled by technicians who are real experts in their field. Due to a mistake in the handling, because the phone can die total CPU IC when picked up by a technician who did not understand and could be less experienced gatot permanently alias fails miserably.

MEMORY
5 Damage Occurs Frequently Internal Memory:

1. Mobile phones are becoming totally dead due to no one because the data is lost or damaged data storage media. Since all mobile operating data contained in the internal memory.
2. Hang. If the data is too full in the program as a result of internal memory can not be processed by the CPU because the data is too dense. Finally the performance of the phone is slow and not optimized.
3. Up close (delete some data). This paper appears when we will store any data in the phone. Or even when we will open the phone menu it says. This damage is caused by junk files accumulate in the internal memory.
4. Blink. Blink is where mobile phones can not be loading or booting to the menu. Damage is caused by some files are not readable because improper positioning and placement so that the system can not be loading normally. The cause is too full application, virus, causing concussion vibration on the IC so that no files are lost or damaged.
5. Restart. Mobile phone restart is where the current is turned off and shortly thereafter to life itself (life and death itself) repeatedly. This is due to file system data is missing or too full.

5 Ways to Avoid Damage Internal Memory:

1. Always diligent erase data that is not used, eg SMS or Phone Book that is no longer needed.
2. Do not store apps and games in the internal memory.
3. Always check the internal memory capacity. Empty space there must be a minimum 20% of total capacity.
4. Avoid storing photos or videos in the internal memory.
5. Every 2 months, did a master reset on the phone to junk files left in your memory can be cleared. Including viruses.

BLUETOOTH
5 Characteristics of Damage Bluetooth:

1. Can not send files. Damage is due to an error in the phone settings or data on the phone memory is too full.
2. Can only accept files only. This damage because the data is too full or there are many junk files on internal memory so that makes Bluetooth software does not work well.
3. Gallery on the phone can not be unlocked. The damage caused by the crash between the data and the Bluetooth phone data. Because Bluetooth has its own software which is different from the phone software. However, if the Bluetooth module is damaged on certain mobile phones can not be unlocked gallery.
4. Bluetooth can not be activated. The damage caused by an error in the software or program on the phone. Or it could also be caused by damage to the Bluetooth modem itself.
5. Dead phone and a Bluetooth module on mobile hot. Damage is due to a shorted component. If the Bluetooth modem was hot then most likely damaged Bluetooth modem.

5 Tips For Sustainable Bluetooth:

1. Do not switch Bluetooth all day in a crowd. Risk of virus entry will be greater, because Bluetooth is a means of entry of the virus into the internal memory.
2. Do not accept incoming messages from Bluetooth which is not known for is most likely a virus. To anticipate this system should enable the Bluetooth device hidden on the menu so that our Bluetooth is not detected by other devices. But there are some software applications that can penetrate the defense system.
3. Change the name of your Bluetooth phone with a name like this: @ name or the name of your phone (space) (exclamation mark). Example: @ I! or @ N70!. We can be sure the Bluetooth on your phone will be safe from virus attacks and hackers.
4. Do not use Bluetooth to excess. Bluetooth is better not used to accept large-capacity files over 3 MB at the time of transfer of data between phones. Because it would create a Bluetooth become weak and be damaged.
5. Not using Bluetooth for internet. Because it would create a Bluetooth become damaged and slow and could result in damage to the mobile phone software that can cause the phone so often hangs and restarts.

Well, that's your phone different solutions in order to stay young!

You have just read an article that categorized Tecno by title How To Keep Your Mobile Younger. If you like it, do not forget to like and share it with your friends... By : Abah Tips Blog

Author by: Abah Tips Blog: How To Keep Your Mobile Younger -